10 Important Facts That You Should Know About Spray Painting

10 Important Facts That You Should Know About Spray Painting

Spray painting is one of the most used methods of painting all over the world. With our years of experience, technical competence, and thorough approach, the UK has commercial spray painter services that give a spray painting solution tailored to all expectations, budgets, and circumstances.

The idea of spray painting has been there for more than half a century and it does not look like that will change in the near future. With the many spray painting techniques and DIY procedures available, painters continue to discover painting methods that are more creative. However, there are some facts about spray painting that most people do not know. This article takes you through ten important facts that you should know about spray painting.

  1. Always choose spray paint over traditional paint

Spray paint, also known as aerosol paint is much easier to use as compared to the traditional paint. When used in furniture, it eventually gives a smooth, consistent finish on your furniture. Spray paint is easier to use and is much more forgiving when you accidentally make a mistake while painting as compared to the traditional paints. What is more is that spray paint is cheaper, dries faster and covers more surfaces. Because it is oil-based, spray paint adheres well to normal surfaces and gives you a cost-effective option away from more expensive paints such as latex.

  1. You can spray paint almost any surface

Because of its versatility, spray paint can be used in a wide range of surfaces including plastic, metal, ceramic, concrete, canvas, particleboard and glass amongst others. However, it is not a wise idea to spray paint surfaces that are likely to come into contact with food and beverages.

  1. Spray painting results depend on the temperature

Does spray painting depend on the temperature of the environment? Yes, it does. If the weather is extremely cold or very wet, you might not get the best results out of a spray painting project. From what the experts have to say, you should wait for the humidity levels to drop below 65% before you can begin your spray painting adventure. However, if you have to paint during the colder seasons, you can do so under a shelter, for example, a garage or something as long as the environment in the area is above 50 degrees. Spray painting during winter will only cause your surfaces to bubble, crack or peel in due time.

  1. Whether or not you will use a primer depends on several factors

Most painters usually make the mistake of using primers during their spray painting projects. However, because spray paints are mostly oil-based, they do not require primers. You will only need a primer if you are going to paint surfaces made of wood, metal and the exterior parts of the object. Using a primer on wood will keep you from attaining an uneven paint finish while it increases the erosion resistance in metal surfaces that are bare.

It is important to note that if you are unsure of whether to use a primer or not, play it safe by inquiring from the professionals first. Another option is to use spray paint brands that have both the primer and paint mixed together.

  1. Different spray paints serve different needs

Simply because one spray paint worked for your friend, it does not mean that it will work for you as well. Take your time to figure out what your requirements are then proceed to make the right decision. Fortunately, different spray paint brands are available. The brands offer great series of protectant aerosols, paint plus primer and any other type of paint that you need.

  1. Spraying light coats and patience will prevent runs

Spray painting is a technique that requires much keenness. To avoids the excessive runs when spraying a vertical surface, spray on a light coat and give it time to dry before moving on to the next part of the surface to be painted. After painting the vertical surfaces, spray slightly to avoid excessive runs. Also, it is better to leave the painted surfaces to dry for about five minutes rather than sanding out the runs.

  1. Have an almost 50% overlap

Having a very small overlap when spray painting means you will have stripes of heavy and light coverage. However, you can counter this by having an almost 50% overlap in a manner that every spray surpasses the previous one by a half.

  1. Avoid swinging the arc

When spray painting, avoid swinging the arc. We understand that swinging is a natural movement of your arm. However, doing that only leaves you with a heavy coverage in the middle of the surface that you are painting. To avoid this problem, move the arc parallel to your surface while at the same time concentrating on maintaining a straight and steady motion.

  1. A respirator is important

When using a spray can, there are high chances that the area you are operating on is full of mist and solvents. Without a respirator, these solvents will find their way into your lungs and nervous system, therefore, affecting your health negatively. It is therefore important to have a respirator to prevent these solvents from reaching your vitals.  On the other hand, you can choose to operate in an open-air environment. However, the problem with that is that the breeze will keep blowing your paint away, therefore, affecting your results.

  1. Take care before and after spraying

Most spray nozzles often spit some droplets before and after you stop spraying. These droplets can sometimes cause a negative effect hence the need to put them away. Before you start spraying, pull the trigger before spraying the actual surface. When done, release the trigger after you have surpassed the edge of your spraying surface.

Conclusion

Spray painting is an art that requires perfection for the best results. However, to acquire perfection a painter must keep several factors into consideration. For instance, a respirator will help prevent your lungs from solvents that fill the air during the spraying process. Also, avoid swinging your hand during spraying, make an almost 50% overlap and pick the right brand of paint for your project. Sticking to the facts provided here will see you have an amazing work of art. For more in-depth info about spray painting please visit abc.com and learn more.

If you have found this article helpful, kindly leave your comment in the box below.