How To Remove Mold Yourself?

How To Remove Mold Yourself?

Molds are a problem of almost every household, and they can get very clumsy and awkward to handle if not taken care off soon. Ignoring the signs of molds is a big mistake, and you wouldn’t want to do the same. You must take adequate steps to remove the molds at an earlier stage, if possible. Impact of mold, once it starts increasing, is pretty cumbersome and can cause a lot of distress. Not to forget, if left like that molds will only increase there presence and become stronger, which makes them harder to deal with.

There are a lot of methods and ways to remediate the problem of molds and deal with them. Molds can be eliminated using simple home techniques as well; you don’t always need the big guns. All you need here is a little awareness and diligent efforts, your house will be cleaned of molds. While not all type of molds can be dealt with natural home remedies, the underlying surfaces and mildew can be treated easily. Below are some of the ways in which the molds at your home can be treated by yourself with the help of this guide on mold removers.

Identification

The first step to cleaning the mold from the house is to ensure that you have identified the mold correctly. Usually, the most common mold, mildew, has a presence of black spots. It could very well be mistaken for dirt as well. The spores in the air fall everywhere and have the potential to grow in damp and humid places. So you will need to look for moist areas first and identify the mold presence.

The black spots could very well be just dirt; you will need to use household bleach to check whether it is mold. Drops of bleach will lighten the mold; if the mold is still dark, it is probably just dirt that you need to clean off.

Precautions

Molds spread around from one thing to another quickly, and hence, when cleaning them, it is essential to take certain precautions while handling and eliminating the molds. It is very important to cover yourself completely, with professional clothes while cleaning the molds.

You need to choose clothes that you can get rid off and throw away after using it. Washing clothes which you were wearing while cleaning mold can transfer the molds to other good clothes as well. So it is better to use old clothes and throw them after the cleaning is done.

You also need to use an old fan across the window where you perform the cleaning and then throw off the fan because it is impossible to clean the spores off the fan after the cleaning is done.

Other usual things you need to take care off is to cover things in plastic and shut off air ducts and air conditioner.

Removing The Molds

If the molds are surface molds, they can be cleaned off by simply cleaning the area thoroughly. For moldy carpets, you will have to cut off the carpets into small sections and seal them into sections to dispose of them. Remember to take the precautions mentioned above. If you are looking to clear an infected mold wall, you will need to open up the wall and then work on removing the mold from it completely. Post cleaning the wall will need to be repaired back. You can clean these using mold removers to get the desired result.

While doing this yourself can take time and dedication, there is also an option to seek professional help with regards to this, wherein proper professionals help you get rid of molds completely.

Clean Up And Repairing

Lastly, once you have removed molds, you will also need to perform a cleanup. Molds are initiated by the spores present in the air and the same need to be cleaned out effectively so that new spores don’t grow. Vacuum the area first with diligence and then clean the area by washing it. This will help you to eliminate the possibility of new molds. Along with this, you will also need to get the repairing done for a new wall or carpet area if the same were opened up during the clean up of the same.

These are some of the ways in which you can treat the molds at your house yourself and obliterate them. Even after molds have been removed, one has to keep regular checks so that the presence of molds can be reduced. In actuality, molds can form at any damp place where the spores from air fall. So keeping a check and applying these measures is a continuous job. I hope this article helps you to tackle the problem of molds at your home quickly and is useful to you.